Building Material Supplier in Karachi Export Processing Zone for garment, electronics, chemical and packaging exporters who need clean paperwork at the zone gate.
Tarmal Construction Solutions delivers structural steel, utility piping, electrical material and fire safety equipment to KEPZ units with invoices and challans prepared for controlled entry. A Karachi family business serving industry since 1961.
When Pakistan created the Export Processing Zones Authority under an ordinance passed in 1980, the first site it developed was in Landhi, on the eastern side of Karachi. The Karachi Export Processing Zone was designed as a fenced, customs controlled enclave where manufacturers could import raw materials, process them and ship finished goods abroad with fewer duties and less red tape than ordinary factories faced.
The original zone was built in two phases covering about 305 acres, with the first phase taking roughly 211 acres and the second about 94. Both are now fully allotted and occupied, and an extension of around 80 acres known as Phase III is being developed to make room for new investors. The authority reports more than 260 local and foreign companies operating in the zone, together employing around thirty thousand people.
Garment and apparel makers make up the largest group, followed by electronics, chemicals, plastic and paper products and food processing. Many are joint ventures or foreign owned firms that answer to overseas head offices and buyers, which means compliance standards for safety, electrical work and documentation are typically higher than the city average.
Location is a big advantage. The zone sits around eighteen kilometres from Jinnah International Airport and roughly ten kilometres from Port Qasim, with Karachi Port reachable through the city road network. For a building material supplier in Karachi Export Processing Zone, the challenge is less about distance and more about meeting gate procedures, working inside occupied plants and keeping paperwork spotless.
The zone's export record explains why owners invest so heavily in their buildings. Units in KEPZ have shipped billions of dollars of goods since the zone opened, and annual exports regularly run into hundreds of millions of dollars. When a single container of garments or electronics carries that much value, nobody wants a leaking roof over the finished goods store, a tripping breaker on a sewing floor or an expired extinguisher spotted by a visiting buyer. Maintenance budgets inside the zone tend to be steady and planned, and purchasing managers look for suppliers who can respond quickly while keeping standards consistent from one order to the next.
Each part of the zone is at a different stage of life, so what clients need from us changes from one phase to the next.
Phase I
The oldest and largest part of the zone, home to many long established garment, electronics and chemical units. Buildings here are decades old and the work is mostly renovation and upgrading. Typical orders include replacement roofing steel and purlins, new electrical distribution, cable trays, galvanized pipe to replace corroded lines and fire safety equipment to meet updated buyer standards.
Phase II
A smaller and somewhat newer phase where units are mid life. Owners here tend to add mezzanines, extend production halls or convert space for new product lines. Orders combine structural sections, shuttering for small civil jobs, aluminium partitions for offices and quality rooms, and electrical fit out material.
Phase III Extension
The expansion area where new factories are going up from bare land. These projects need the full sequence from site preparation, rebar and shuttering through H-Beams, roof structures and cladding to utilities and safety systems. We plan phased deliveries around each contractor's programme so the plot never runs short or gets overloaded.
In every phase, material entering the zone passes a controlled gate. We prepare invoices, delivery challans and any details the zone office requires before dispatch, so a construction material supplier in Karachi Export Processing Zone is not stuck outside waiting for documents.
Plant engineers and admin managers in the zone often search for a building material supplier near me when a buyer audit is scheduled, a production line is being reconfigured or a breakdown needs a part that cannot wait for an overseas shipment. A nearby supplier who understands zone procedures saves days.
Quick answer
Tarmal Construction Solutions is a Karachi based wholesale steel supplier in Karachi Export Processing Zone and the surrounding Landhi and Korangi industrial areas. We supply structural steel, pipes and fittings, electrical material, fire fighting equipment, tools and site consumables, with paperwork ready for gate entry. Call +923323165302 for stock confirmation.
Zone rules shape how work happens on site. Contractors need passes, vehicles are checked and deliveries must match their documents. A reliable steel supplier in Karachi Export Processing Zone builds these requirements into the dispatch plan, sends drivers who know the routine and keeps a contact person available if the gate has questions.
Many KEPZ companies report to parent firms abroad and must show clean procurement records. Working with one material provider for steel, piping, electrical and safety items gives them consolidated invoices and a clear audit trail, which is far easier to defend than a stack of receipts from small hardware shops.
Language and process also matter for foreign managed units. We put specifications, grades and quantities in writing, confirm substitutions before dispatch and share delivery details in advance, so expatriate engineers and local procurement staff can approve orders quickly without misunderstandings. Where a drawing calls for a foreign standard section that is not commonly stocked in Pakistan, we suggest the nearest local equivalent and wait for written approval before supplying it.
As a wholesale building material supplier in Karachi Export Processing Zone, we support new builds, expansions and day to day maintenance from one Karachi stock base. Our range covers three practical areas.

Our iron and steel range covers H-Beams, I-Beams, C Channels, equal and unequal angles, flat bars, plain bars and deformed bars for frames, mezzanines and reinforced concrete. We supply aluminium sheet, coil, doors and windows that exporters often choose for offices, sampling rooms and quality labs, and copper rods, strips and fittings for earthing systems that electronics makers depend on.
We handle metal fabrication for platforms, racks, canopies and equipment frames, and provide storage tanks and trays, cable tray systems, gratings and powder coated parts. Although the zone has a perimeter wall, units still separate stores, chemical areas and loading yards, so we also supply fencing material including welded mesh, chain link and razor wire.

Delivering all of these from one source matters inside a controlled zone, because every extra vendor means another gate entry, another set of documents and another chance for delay.
The export zone has a distinctive mix of industries, led by apparel but with strong electronics, chemical and packaging representation. The cards below begin with the sectors most common in KEPZ and continue with the full range we supply.















Because many of these exporters work to international buyer codes, we pay close attention to material grades, documentation and consistent supply. A garment unit facing an audit and an electronics plant installing a new line both need certainty more than anything else.
Ordering for a zone unit involves a little more paperwork than a normal site, so we handle as much of it as possible on our side.

New factories in the Phase III extension need large volumes of fill and aggregate before construction can begin. We arrange construction sand for masonry and plaster, sand gravel for base courses and graded crushed stone for slabs, footings and internal roads.
Production floors for electronics and garments need flat, durable concrete that will carry racking and machines without cracking. We can match aggregate to your designer's mix and time deliveries to the concrete mixing schedule, which avoids stockpiles blocking access lanes inside a busy zone.
For renovation work in the older phases, quantities are smaller and access is tighter. We send aggregate in manageable loads alongside steel or shuttering, keeping costs at affordable and competitive prices and keeping neighbouring units happy. Where a plant has no space at all for a stockpile, we can deliver directly into the pour by coordinating with your ready mix or site mixing crew.

The Phase III expansion is where most ground work happens today. We support new builds with land clearing, excavation services, leveling and foundation preparation through our network of operators and skilled labor teams, all briefed on zone access rules.
Work covers clearing debris and vegetation, cutting and filling to the approved level, excavating footings and service trenches, and compacting before blinding concrete. Once foundations are ready, the same order continues with deformed bars, F clamps, tie rods and screw jacks for the pour.
In the older phases, excavation is usually small scale, such as trenches for new cable runs or drainage repairs inside working plants. We plan these jobs to keep disruption low and to keep production lines running, often scheduling the noisy work for weekends or holiday breaks when the floor is empty and neighbouring units are not affected.
Investors budgeting a new unit, and managers planning upgrades, regularly ask for the steel rate today and the current bricks rate in Pakistan. These change often with import costs for billet and scrap, the exchange rate, fuel prices and seasonal demand.
Instead of a price list that goes stale in days, we send a live written quotation for your exact sizes and quantities, including delivery to your KEPZ plot. Many foreign managed units need quotations in a standard format for internal approval, and we are happy to provide that.
Our building material quotation is free and carries no obligation, so it is easy to compare against other offers before your purchase order is released.
For exporters who import some materials directly under zone privileges, we can still help by quoting locally available equivalents. Comparing a landed import price with a Karachi stock price, including the time saved, often shows that local supply is the better choice for standard sections, pipe, cable and fasteners, while special items remain imported.
Tarmal Construction Solutions is part of Hussaini Sulemanjee and Co, founded in 1961, and has grown into an importer, stockist and fabricator serving export, process and heavy industries. When a KEPZ unit compares suppliers, these are the differences we usually see against a small local vendor.
| Factor | Typical Small Vendor | Tarmal Construction Solutions |
|---|---|---|
| Product range | A few steel sections or hardware lines | Steel, pipes, electrical, safety, lifting, tools and site materials in one order |
| Bulk capacity | Limited stock, frequent back orders | Wholesale stock suited to plant and contractor volumes |
| Industrial experience | Mostly retail and residential buyers | Decades of supply to oil, power, fertilizer and process industries |
| Fabrication | Outsourced or not offered | Metal fabrication, tanks, trays, gratings and powder coating |
| Documentation | Basic receipts | Formal quotations, invoices and delivery records for audits |
| Zone gate readiness | Paperwork often incomplete at entry | Invoices and challans prepared for controlled zone entry |
Our goal is to be the building material supplier that a zone based exporter can call once, knowing the material and the paperwork will both arrive right.
KEPZ sits in Landhi, connected to the rest of Karachi by Korangi Road, the National Highway and the routes toward Port Qasim. Trucks from the city reach the zone in well under an hour outside peak traffic, but shift change times around Landhi and Korangi can slow movement considerably.
Our construction material delivery in Karachi Export Processing Zone includes advance coordination with your admin or stores team, documents matching your purchase order, and delivery slots chosen to avoid busy loading times at the gate. For urgent maintenance needs we use smaller vehicles that move faster through city traffic.
We know that space inside occupied plants is limited. Large orders can be split into several drops that follow your installation sequence, and steel can be delivered with protective oil or covers when it has to wait in an open yard during humid months.
On price, our wholesale volumes and broad stock let us offer affordable construction material without compromising grade or origin. Consolidating items on fewer trucks also means fewer gate entries, which saves your staff time as well as freight cost.
We also support units through their annual shutdown or Eid break, when most zone factories carry out their heaviest maintenance. If you share the work list a few weeks ahead, we reserve the steel, pipe, cable and safety items in advance and deliver them before the shutdown starts. Your contractors then spend the break working instead of waiting for material, and production restarts on time.
Planning work inside KEPZ?
Send your requirement and receive a delivered, documented quotation from Tarmal Construction Solutions, a trusted building material supplier for Karachi's export industry.
BC-10, Shop-7, Block 9 Clifton, Karachi
Yes. We deliver to units in Phase I, Phase II and the Phase III extension, with invoices and delivery challans prepared for controlled gate entry. Share your plot number and gate contact when you order.
Each load carries an invoice and a delivery challan that match your purchase order line by line. If your zone office needs additional details, tell us when ordering and we will include them.
Yes. We cover the full build from site preparation, rebar and shuttering to structural steel, roofing, utilities, electrical material and fire safety.
Yes. We supply fire extinguishers, hose reels, alarms, emergency items, electrical cable, breakers and switchgear often flagged in compliance audits, and we can deliver at short notice before an inspection.
Prices change with import costs and the exchange rate, so we quote live. Send your sizes and quantities and we will return a written delivered price, in a standard format if your head office requires one.
Yes. We stock copper rods, strips and fittings used in earthing systems, along with cable trays and electrical distribution material.
Stocked items can often be dispatched the same day, and bulk orders usually move within one to two working days after confirmation, subject to zone gate timings.
Email your list to Tarmalsteel@gmail.com or call +923323165302. Mention the phase, plot number and any gate requirements so we can plan delivery properly.